Pulse Setting
The Pulse Function can only be used for Cold Blending and NOT for Hot/Heated
blending. The Pulse function will automatically be set on the Fastest/ Highest blending
setting which is 9 and can run for a maximum of 1 minute blending at a time. The Pulse
function is great feature which allows you to control what you are mixing/cooking with,
giving you that perfect consistency and texture that you are looking for and can also be
used to breakdown ingredients before selecting another pre-set program.
Step 1 - Once your contents are in the Jug you are to lock and secure the lid into place. The ON/OFF button
will now start to flash and the selector wheel will appear to have no numbers and show as (-- --). (E01 will
appear if the lid is not properly secured or aligned with handle. The lid not being locked in will cause the
Mealio™ to not function which is a safety feature).
Step 2 - Select/Touch the ON/OFF button and you will see that the flashing has disappeared and the 8 Pre
Set Programs and the touch control panel will light up. The Selector Wheel Screen will now appear to have the
numbers 00:00 in the first row and 0 on the second row.
Step 3 - For the Mealio™ to start Pulsing you are to touch and hold your finger on the Pulse button and you will
start to see that the ingredients in the jar blend. Removing your finger away from the Pulse button will stop the
Mealio™ from pulsing. Please keep in mind that the touch control panel is touched base.
Step 4 - Once you select the Pulse Function it will automatically start pulsing and the selector wheel screen
will have the number numbers counting down from 60 seconds in the first row and the second row will the
number 9 which is the level of speed.
Note: If E01, E03, E04 or E05 appears to be displayed you on your selector wheel screen during your
cooking process at any time please DO NOT panic and go to PAGE 16 for more information on what these
safety errors mean.
INGREDIENTS WARNING: Please ensure that all wet ingredients such as the liquids (cream and water) is to
go in first , then is to be followed by any other dry ingredients at the top such as (beans, potato’s and
legumes). Any spices, stock cubes and powdery substances is to be added into the Mealio™ last to avoid any
of these products sticking to the base of the Mealio™ Jar. Please make sure that the produce and liquid is
cold/raw to prevent the Mealio™ from overheating (RAW MEAT IS NOT TO BE ADDED INTO THE MEALIO™). If
you are adding pre-cooked ingredients please make sure it has completely cooled down and is cold before
PROGRAMS
To Next Page
Loading...