Klipsch Klipschorn Owner's Manual

BI-WIRE
BI-AMP
Front Right Front Left
Front Right Front Left
H
MID OUT
TWEETER
OUT
L
H
MID OUT
TWEETER
OUT
L
Front Right Front Left
AMPLIFIER 2
AMPLIFIER 1
AMPLIFIER
– OR –
CONNECTIONS - BI-WIRE AND BI-AMP
DOUBLE CÂBLE • CABLEADO DOBLE • BI-WIRING • DOPPIO •
BI-CABLAGEM • 双线 •
DOUBLE AMPLIFICATEUR • AMPLIFICACIÓN DOBLE • BI-AMPING •
BI-AMPLIFICAZIONE • BI-AMPLIFICAÇÃO • 双功放 •
OU • O BIEN • ODER • OPPURE • OU • 或 •
CONNEXIONS À DEUX CÂBLES ET À DEUX AMPLIFICATEURS • CONEXIONES - CABLEADO DOBLE Y AMPLIFICACIÓN DOBLE • ANSCHLÜSSE – BI-WIRING UND BI-AMPING • CONNESSIONI - CABLAGGIO DOPPIO E BI-AMPLIFICAZIONE
CONEXÕES - BI-CABLAGEM E BI-AMPLIFICAÇÃO • 连接 - 双线和双功放 •
 




Klipsch Klipschorn Specifications

General

Sensitivity	105dB @ 2.83V / 1m
Nominal Impedance	8 ohms
Crossover Frequencies	450Hz, 4500Hz
Frequency Response	33Hz - 17kHz (±4dB)
Power Handling	100W continuous / 400W peak
High Frequency Driver	K-771 1" (2.54cm) compression driver
Mid Frequency Driver	K-55-X 2" (5.08cm) compression driver
Low Frequency Driver	K-33-E 15" (38.1cm) Fiber-composite cone woofer
Enclosure Material	Birch plywood
Dimensions	31.25" (79.4cm) x 28.5" (72.4cm)
Weight	175 lbs (79.4 kg)