Need help?Do you have a question about the Klipsch RSB-3 and is the answer not in the manual?
General| Audio Channels | 2.0 |
|---|---|
| Surround Sound | dolby digital |
| RMS Power | 56 watts |
| Maximum Frequency Response | 18 kilohertz |
| Minimum Frequency Response | 55 hertz |
| Inputs | analog audio |
| Outputs | usb type a |
| USB Ports | 1 |
| Bluetooth | yes |
| Wireless Connectivity | bluetooth |
| Optical Audio Inputs | 1 |
| Remote Control | yes |
Weight and Dimensions| Depth | 4 inches |
|---|---|
| Height | 2.6 inches |
| Width | 36 inches |
| Net Weight | 7.1 pounds |
Details the main sound bar unit included in the package.
A template provided for wall mounting the sound bar.
Includes the remote control for operating the sound bar.
The power cord for supplying electricity to the sound bar.
Cable for digital audio connection to compatible devices.
Control to silence the audio output of the sound bar.
Enables selection and pairing of Bluetooth audio sources.
Button to cycle through available audio input sources.
Blue LED indicating Bluetooth connection status.
Green LED indicating analog audio source status.
Red LED indicating digital optical audio source status.
LED indicating active Dolby Digital signal.
LED indicating the status of the virtual surround mode.
LED indicating the status of the dialog enhancement mode.
Button to decrease the audio volume.
Button to increase the audio volume.
Controls the power state of the sound bar.
Selects the Bluetooth audio input source.
Selects the analog audio input source.
Selects the digital optical audio input source.
Increases the sound volume.
Decreases the sound volume.
Silences the audio output.
Controls the illumination of the sound bar's LEDs.
Activates or deactivates the dialog enhancement feature.
Activates or deactivates the virtual surround sound feature.
Information on Dolby Audio signal reception and licensing.
Details on the Klipsch Custom DSP for virtual surround sound.
Information on optimizing EQ for clearer dialog.
Step-by-step instructions for pairing devices via Bluetooth.
Start the remote programming sequence by holding Mute.
Indicator that the sound bar is ready for programming.
Press a button on the TV remote to program it.
Indicates the successful programming of a command.
Program the TV remote's Volume Up button.
Confirms successful programming of multiple commands.
Indicates successful programming of a command.
Procedure to reset the device to its original factory settings.
To Next Page
