To Next PageTo Next Page
Need help?Do you have a question about the Klipsch RSB-6 and is the answer not in the manual?
Details on settings for Consumer, Retail, Display, and Installer modes, optimizing performance for different environments.
Press and hold source and volume up buttons simultaneously for >5 seconds within 10 seconds of plugging in AC power.
Press volume + to cycle through modes; desired mode indicated by specific LED fast blink pattern.
Allow the selected mode's LED to flash for 10 seconds to automatically exit demo select mode and confirm the selection.
Details on settings for Consumer, Retail, Display, and Installer modes, optimizing performance for different environments.
Press and hold source and volume up buttons simultaneously for >5 seconds within 10 seconds of plugging in AC power.
Press volume + to cycle through modes; desired mode indicated by specific LED fast blink pattern.
Allow the selected mode's LED to flash for 10 seconds to automatically exit demo select mode and confirm the selection.
This document outlines the various operational modes for Klipsch sound bars, designed to cater to different environments beyond standard consumer use. These modes include retail demonstration, display demonstration, custom installer, and the default consumer listening mode. The instructions provided are specifically for engaging these specialized modes, which are not typically covered in the owner's manual due to their non-consumer application.
Klipsch sound bars are versatile audio devices that offer optimized performance across distinct operational settings. The core function of these sound bars is to deliver high-quality audio, whether for personal entertainment in consumer mode, engaging potential customers in a retail environment, showcasing features in a display setting, or providing tailored audio solutions in an installer-configured setup. Each mode adjusts the sound bar's internal settings, connectivity options, and user interface behavior to best suit its intended purpose.
The Consumer Mode, which is the default setting out of the box, is designed for everyday home use. In this mode, the sound bar offers full functionality, including Bluetooth and WiFi connectivity, and remains in standby after 30 minutes without an audio signal. The default source is either Bluetooth (on first use) or the previously selected source. Remote control and front keypad controls are fully enabled, and the volume is adjustable by the user. This mode prioritizes user convenience and flexibility for a typical home entertainment setup.
The Retail Mode is specifically engineered for product demonstrations in a retail store. In this mode, Bluetooth and WiFi are disabled to prevent interference and ensure consistent demonstration audio. The sound bar is always on (Standby is disabled), and CEC (Consumer Electronics Control) is enabled, defaulting to a specific source. Optical input is the default source, ensuring a reliable audio feed for demonstrations. Remote control functionality is limited, with Bluetooth source selection disabled, and front keypad controls are restricted (volume +/- disabled) to maintain a controlled demonstration experience. The volume is fixed and not adjustable by store visitors, ensuring a consistent audio level for all demonstrations. This mode is crucial for showcasing the sound bar's capabilities effectively in a busy retail environment without requiring constant supervision or adjustments.
The Display Mode is similar to Retail Mode but tailored for static product displays where the sound bar might be part of a larger home theater setup. Like Retail Mode, Bluetooth and WiFi are disabled, and the sound bar remains always on. CEC is enabled, defaulting to a specific source, with Analog input as the default source. Remote control functionality is limited (Bluetooth source selection disabled), and front keypad controls are disabled entirely. The volume is fixed and not adjustable, ensuring a consistent audio output for display purposes. A key feature of Display Mode is its ability to return to a default volume level after 60 seconds of no user interaction, making it ideal for unattended displays where the audio might be briefly adjusted by curious onlookers but should revert to a baseline.
The Installer Mode provides a more flexible configuration for professional installers who need to integrate the sound bar into custom audio systems. In this mode, Bluetooth and WiFi are enabled, allowing for versatile connectivity options. The sound bar is always on (Standby is disabled), and the default source is either Bluetooth (on first use) or the previously selected source. Remote control and front keypad controls are fully enabled, and the volume is adjustable. This mode empowers installers to fine-tune settings and integrate the sound bar seamlessly into complex setups, offering greater control than the consumer mode while maintaining an always-on status for continuous operation.
Engaging these specialized modes involves a specific sequence of actions designed to prevent accidental activation by consumers. The process is initiated by simultaneously pressing and holding the "source" and "volume up" buttons for more than 5 seconds within 10 seconds of plugging in the AC power. This action puts the sound bar into "Demo Select mode."
Once in Demo Select mode, the user can cycle through the available modes (Consumer, Display, Retail, and Installer) by pressing the "volume +" button. Each mode is indicated by a specific LED on the front panel flashing at a rapid 4Hz rate:
To select a desired mode, the user simply allows the corresponding LED to flash for 10 seconds. After this period, the unit automatically exits Demo Select mode and remains in the chosen operational mode. This deliberate selection process ensures that the sound bar operates in the intended environment with its optimized settings.
While the document does not explicitly detail maintenance features in the traditional sense (e.g., cleaning instructions), the various modes themselves contribute to a form of operational maintenance by optimizing the sound bar's behavior for specific environments. For instance, in Retail and Display modes, the disabling of Bluetooth and WiFi, along with fixed volume and restricted controls, helps prevent unauthorized tampering or misconfiguration in public settings. This reduces the need for frequent manual adjustments or troubleshooting by store staff.
The "always on" feature in Retail, Display, and Installer modes ensures continuous operation without the sound bar entering a standby state, which is crucial for consistent demonstrations or integrated systems. The automatic return to a default volume level in Display Mode after inactivity also serves as a self-correcting mechanism, maintaining a consistent presentation without requiring manual intervention.
The clear LED indicators for each mode provide a quick and easy way to verify the sound bar's current operational status, aiding in troubleshooting or confirming proper setup. This visual feedback simplifies the management of multiple units in a retail or installation context. By providing distinct modes with tailored functionalities, the Klipsch sound bar design implicitly supports operational efficiency and reduces the need for constant oversight in specialized environments.
General| Audio Channels | 2 |
|---|---|
| Subwoofer | included |
| Surround Sound | dolby digital |
| High Resolution Audio | yes |
| Dialogue Enhancement | no |
| Number of Drivers | 4 |
| Video Pass-through | 2160 (4k) |
| Tweeters | 1 |
| Maximum Frequency Response | 15 kilohertz |
| Minimum Frequency Response | 30 hertz |
| Inputs | 3.5mm audio, hdmi, optical digital audio |
| Outputs | hdmi |
| HDMI Inputs | 1 |
| HDMI Outputs | 1 |
| HDMI ARC Ports | yes |
| HDMI HDCP 2.2 Inputs | 1 |
| HDMI HDCP 2.2 Outputs | 1 |
| USB Ports | 0 |
| Bluetooth | yes |
| Wireless Connectivity | bluetooth, wi-fi |
| Wireless Subwoofer Connectivity | no |
| Wireless Multi-Room Audio | no |
| Optical Audio Inputs | 1 |
| Remote Control | yes |
Weight and Dimensions| Depth | 3.8 inches |
|---|---|
| Height | 3.8 inches |
| Width | 40 inches |
| Net Weight | 6.5 pounds |
| Subwoofer Depth | 13.5 inches |
| Subwoofer Height | 10.5 inches |
| Subwoofer Width | 7.375 inches |
| Subwoofer Weight | 9.6 pounds |
