Klipsch RSB-14 User Manual

!
!
Sound&Bar&Demo&Mode&Instructions&
!
The!new!Klipsch!sound!bars!come!with!specific!modes!for!retail!demonstration,!display!
demonstration,!and!custom!installer!mode,!in!addition!to!the!consumer!listening!mode!(which!
is!the!default!out!of!the!box!setting).!!!
!
The!retail,!display!and!installer!modes!have!been!designed!to!optimize!performance!in!their!
respective!environments!and!access!to!these!modes!is!not!covered!in!the!owner’s!manual!as!
they’re!not!for!consumer!use.!
!
Below!is!the!detail!on!the!settings!for!each:!
!
!
How&to&put&the&Klipsch&sound&bar&into&one&of&the&Demo&Modes:&
!
Step&1:!!Within&10&seconds&of&plugging&in&AC&power,&Press&and&hold&source&and&volume&up&
buttons&simultaneously&for&>5&seconds&to&engage&Demo&Select&mode.&&&
&
Step&2:
&
While&in&Demo&Select&Mode,&press&the&volume&+&button&to&cycle&through&the&Consumer,&
Display,&and&Retail&modes.&&Press&the&Volume&+&button&until&the&desired&mode&is&flashing.&The&
following&LEDs&on&the&front&panel&of&the&sound&bar&will&illuminate&to&indicate&which&mode&the&
sound&bar&is&in:&
&
• HDMI1&LED&will&fast&blink&at&4Hz&to&indicate&Consumer&Mode.!
• Analog&LED&will&fast&blink&at&4Hz&to&indicate&Display&Mode.!
• Digital&LED&will&fast&blink&at&4Hz&to&indicate&Retail&Mode.&!

Klipsch RSB-14 Specifications

General

Audio decoders	-
RMS rated power	135 W
Audio output channels	2.1 channels
Peak Music Power Output (PMPO)	200 W
FM radio	No
Product color	Black, Silver
Wall mountable	Yes
Recommended usage	TV
Woofer diameter	63.5 mm
Tweeter diameter	19 mm
Number of woofer drivers	4
Number of tweeter drivers	2
Soundbar speaker RMS power	- W
Signal-to-Noise Ratio (SNR)	110 dB
Subwoofer type	Active subwoofer
HDMI in	3
Bluetooth version	2.0+EDR
Number of HDMI outputs	1
Connectivity technology	Wired & Wireless
Digital audio coaxial in	0
Cables included	AC, HDMI
Apple docking compatibility	Not supported
AC input voltage	110 - 120 V

Weight and Dimensions

Depth	82.6 mm
Width	1117.5 mm
Soundbar weight	4540 g
Subwoofer depth	406.4 mm
Subwoofer width	177.8 mm
Subwoofer height	333.4 mm
Subwoofer weight	10890 g

Summary

Sound Bar Demo Mode Instructions

Demo Mode Overview and Settings

Explains the purpose of retail, display, and installer modes for Klipsch sound bars, and details their settings.

Entering Demo Select Mode

Instructions to press and hold source and volume up buttons simultaneously within 10 seconds of plugging in AC power.

Selecting a Demo Mode

Press volume + to cycle through modes; LEDs indicate Consumer, Display, or Retail mode via fast blinking.

Indicating Installer Mode

HDMI2 or TV LED fast blinking at 4Hz indicates Installer Mode on specific Klipsch sound bar models.

Confirming Demo Mode Selection

Allow the selected LED to flash for 10 seconds; the unit automatically exits demo select mode.