Need help?Do you have a question about the Klipsch RW-10d and is the answer not in the manual?
General| Type | Powered Subwoofer |
|---|---|
| Driver Size | 10 inches |
| Frequency Response Tolerance | ±3dB |
| Amplifier Power | 200 watts RMS |
| Amplifier Power Peak | 400 watts |
| Maximum Acoustic Output | 115dB |
| Woofer Direction | Front-firing |
| Enclosure Type | Bass-reflex |
| Outputs | Speaker-level |
| Phase | 0-180 degrees |
Details how to access and adjust various subwoofer settings using the control keypad and display.
Covers adjusting subwoofer volume and selecting bass emphasis EQ modes like 'Punch', 'Depth', or 'Flat'.
Explains how to adjust the lowpass filter frequency and acoustic phase for optimal sound blending.
Covers saving settings, display brightness, power modes ('Auto On', 'Always On'), and keypad locking.
Describes the main AC power switch and the infrared remote control sensor on the rear panel.
Provides guidance on cleaning the subwoofer's vinyl finish using dry dusting or a soft cloth.
Details the 5-year warranty for materials/workmanship and 2-year for electronics/amplifiers in the US/Canada.
Covers warranty outside US/Canada and FCC/Canadian compliance information for the device.
To Next Page
