Need help?Do you have a question about the Klipsch R-10SW and is the answer not in the manual?
General| Frequency Response | 32Hz - 120Hz +/- 3dB |
|---|---|
| Maximum Acoustic Output | 112dB |
| Enclosure Material | MDF |
| Phase | Switchable 0-180 degrees |
| Auto Power On/Off | Yes |
| Amplifier Power | 150W RMS, 300W Peak |
| Driver | 10-inch |
| Enclosure Type | Bass-reflex |
| Inputs | Line level/LFE RCA jacks |
| Amplifier | Digital |
| Low Pass Crossover | 40-120Hz |
| Woofer | 10" (25.4 cm) spun-copper IMG woofer |
Defines 'Reference' as the standard or benchmark used for comparison in audio.
Describes 'Reference' as the embodiment of the legendary Klipsch sound quality.
Explains how to connect the subwoofer using line-level inputs from a receiver.
Guides on adjusting Lowpass filter, subwoofer level, and phase for optimal sound.
Details the Off/Auto/On switch and the Power LED indicator status.
To Next Page
