Need help?Do you have a question about the Klipsch R-120SW and is the answer not in the manual?
General| Material | MDF |
|---|---|
| Product color | Black |
| LED indicators | Yes |
| Phase shift | 0 - 180 ° |
| Subwoofer type | - |
| Subwoofer peak power | 400 W |
| Subwoofer sensitivity | 116 dB |
| Subwoofer driver diameter | 304.8 mm |
| Subwoofer frequency range | 29 - 120 Hz |
| Subwoofer driver diameter (imperial) | 12 \ |
| Line inputs (RCA) | 2 |
Weight and Dimensions| Subwoofer depth | 488 mm |
|---|---|
| Subwoofer width | 356 mm |
| Subwoofer height | 419 mm |
| Subwoofer weight | 14100 g |
Check for transit damage immediately upon unpacking. Verify components against the packing list.
Guidance on optimal placement for bass performance and room acoustics, referencing Figure 1.
Connecting the subwoofer to a receiver or pre-amplifier using line-level audio cables.
Setting the crossover frequency to blend subwoofer bass with main speakers effectively.
Adjusting the subwoofer's volume to match main speaker output for balanced sound.
Adjusting phase to acoustically match subwoofer output with main speakers.
Managing the subwoofer's power state for automatic operation or manual control.
Understanding the LED status for amplifier and signal reception.
To Next Page
