Need help?Do you have a question about the Klipsch R-121SW and is the answer not in the manual?
General| Phase shift | 0 - 180 ° |
|---|---|
| Subwoofer type | Active subwoofer |
| Low pass filter | No |
| Number of subwoofers | 1 |
| Subwoofer peak power | 300 W |
| Subwoofer frequency range | 29.5 - 120 Hz |
| Subwoofer driver diameter (imperial) | 12 \ |
| Material | MDF |
| Bass reflex | Yes |
| Product color | Black |
Weight and Dimensions| Subwoofer depth | 500 mm |
|---|---|
| Subwoofer width | 356 mm |
| Subwoofer height | 370 mm |
| Subwoofer weight | 13900 g |
Check for transit damage, unpack carefully, and verify components against the packing list.
Connect receiver subwoofer output or L/R pre-amp outputs to the subwoofer's line inputs.
Sets the crossover point to blend subwoofer bass frequencies with main speakers.
Matches subwoofer output acoustically with main speakers for better bass response.
Controls the subwoofer's power state, including automatic standby mode.
Adjusts subwoofer volume to match the output level of your main speakers.
Shows the operating status of the subwoofer's built-in amplifier.
To Next Page
