Need help?Do you have a question about the Klipsch R-8SW and is the answer not in the manual?
General| Frequency Response | 38Hz - 120Hz +/- 3dB |
|---|---|
| Amplifier Power | 150W |
| Amplifier Type | Class D |
| Amplifier Power RMS/Peak | 50W / 150W |
| Enclosure Material | MDF |
| Inputs | Line Level / LFE RCA Jacks |
| Driver Size | 8" |
| Enclosure Type | Bass Reflex |
| Woofer Material | IMG |
| Voltage | 100V-240V 50/60Hz |
| Low Pass Crossover | 40Hz - 120Hz |
| Phase Control | 0-180 degrees |
Details on checking the speaker system for transit damage and verifying components upon receipt.
Guidance on placing the subwoofer for optimal bass reproduction and room acoustics.
Details how to connect the subwoofer using line-level inputs from a receiver or pre-amplifier.
Explains setting the crossover frequency to match main speakers for optimal bass blending.
Guides on adjusting the subwoofer's volume to match main speaker output for balanced sound.
Describes selecting phase for acoustically matching subwoofer output to main speakers.
Explains the auto-on/standby functionality based on signal detection.
Details the function of the LED indicator on the front baffle for status.
To Next Page
