Need help?Do you have a question about the Klipsch SYNERGY Series and is the answer not in the manual?
General| Series | SYNERGY |
|---|---|
| Sensitivity | Check individual model |
| Impedance | 8 ohms |
| Woofer | Check individual model |
| Tweeter | Check individual model |
| Enclosure Type | Check individual model |
| Dimensions | Check individual model |
| Weight | Check individual model |
Check new speaker system for transit damage, unpack, and verify components against packing list. Notify dealer if damaged.
Connect speaker wire to amplifier terminals, ensuring correct polarity and avoiding shorts.
Klipsch speakers are efficient, 8-ohm compatible, and handle high output. Use caution with volume.
Dust speakers occasionally. Use only dry cloth. Avoid abrasive cleaners or harsh detergents.
Register online at klipsch.com for updates. Personal info is not resold or used for warranty.
Place 6-15 ft apart, 24 inches from walls. Toe-in for stereo imaging. Listening position 1-1.5x distance.
Place near the screen for dialogue. Position directly on top of or below the screen.
Place 2 ft above listening position, on walls adjacent or behind. Recreate space and ambience.
Place in a corner for optimum bass. Experiment with placement and settings for best room fit.
Connect subwoofer to receiver's line-level output (Subwoofer Pre Out, LFE) for music and surround sound.
Sets crossover point to blend bass frequencies between speakers and subwoofer.
Adjust subwoofer volume to match main speaker output. Use receiver or amplifier volume for overall control.
Select position (0 or 180 degrees) for best acoustic match and output at listening position.
Automatic power control. Subwoofer turns on with signal, enters standby after inactivity.
Indicates amplifier status: green for on and receiving signal, dark when off.
To Next Page
