Need help?Do you have a question about the KLS Martin maXium smart C and is the answer not in the manual?
Non-observance of this document can lead to serious or even lethal patient injury.
Provides definitions for technical terms and abbreviations used in the document.
States the validity of the document from a specific software version.
Explains the meaning of symbols and signal words used throughout the manual.
Provides general information about the product and its CE marking.
Contact information for product management and service center.
Lists the included components for the electrosurgery unit, argon beamer, and equipment cart.
Instructions for checking the goods for completeness and potential damage upon receipt.
Details the terms and conditions of the product warranty.
Describes the intended use of the maxium® smart C electrosurgery unit.
Describes the intended use of the maxium® smart Beam accessory.
Provides instructions for proper operation and handling of the device.
Introduction to the principles of high-frequency electricity in surgery.
Explains the principles of monopolar HF current application in electrosurgery.
Explains the principles of bipolar HF current application in electrosurgery.
Discusses risks associated with stray currents, including patient shunts and leakage currents.
Details risks from current concentration in the body and at the neutral electrode.
Covers hazards related to arcing and sparking in electrosurgery and ignition risks.
Addresses dangers of neuromuscular stimulation and other risks associated with high voltage.
Explains risks from electromagnetic interference affecting the unit and active implants.
Covers risks associated with pressure vessels and argon gas flow, including embolisms.
Discusses risks of gas insufflation in endosurgical applications, such as pressure increase.
Covers various miscellaneous risks including inadvertent HF emission and device combinations.
Provides a general overview of the maxium® smart C's features and capabilities.
Details the front panel connections for monopolar, bipolar, and neutral electrode sockets.
Describes the rear panel connections for foot switches, interface, serial ports, and bonding.
Explains the operation of the ON/OFF key and the touchscreen interface.
Details the maxium® smart Beam, an accessory for argon plasma coagulation.
Information on approved accessories, wear parts, and single-use articles.
Instructions for setting up the maxium® smart C as a standalone unit.
Guide for stacking and connecting the maxium® smart C and maxium® smart Beam components.
Instructions for installing the system components on the maxium® smart Cart.
States requirements for personnel using the unit and adherence to instructions.
Describes the process of switching on the unit and the self-test sequence.
Details the self-test process for the maxium® smart Beam and typical messages.
Instructions for examining and connecting active and neutral electrodes.
Provides detailed guidance on applying the neutral electrode to ensure safe operation.
Explains how the argon filling level is displayed and indicates important information.
Describes automatic activation functions for bipolar coagulation, including delay settings.
Highlights limitations and safety aspects of the auto-start function, especially in endoscopy.
Overview of device operation, settings via touchscreen, and use of pre-defined programs.
Explains how to select and deselect working channels on the screen for clarity.
Guide to setting HF output power, current, effect, and activation type for working channels.
Explains how to navigate through programs and functions using the touchscreen menus.
Details how to save, modify, and delete programs for customized settings.
Describes various unit and service settings available in the Setup menu.
Details monopolar cutting currents like Pure Cut, Blend Cut, Uro Pure Cut, Uro Blend Cut, Soft Cut, and Argon Cut.
Describes monopolar coagulation currents such as Forced Clamp, Forced Prep, Spray, Contact Coag, Forced Coag, Uro Coag.
Details bipolar cutting currents like Bipol Pure Cut and Forfex.
Describes bipolar coagulation currents like BiCoag, Neptun.
Lists and explains messages that may appear during the unit's self-test.
Provides troubleshooting steps for messages indicating activation errors.
Explains messages related to illegal inputs or settings and how to resolve them.
Details messages related to program management, such as overwriting or memory full.
Lists messages from the argon beamer and fume suction system and their descriptions.
Lists system error messages that the user can resolve independently.
Information on how to dispose of or recycle the product packaging.
Notes on ecological considerations during product operation.
Instructions for the proper disposal of the device according to regulations.
Highlights the need to observe national regulations for disposal measures.
Lists the key features and specifications of the maxium® electrosurgery unit.
Provides detailed technical data for the maxium® smart C unit.
Provides detailed technical data for the maxium® smart Beam accessory.
General| Type | Electrosurgical unit |
|---|---|
| Operating Frequency | 350 kHz |
| Max. Output Power (Monopolar) | 400 W |
| Max. Output Power (Bipolar) | 120 W |
| Power Output | Adjustable |
| Display | Touch screen |
| Mains Voltage | 100-240 V |
| Mains Frequency | 50/60 Hz |
| Connectivity | USB, Ethernet |
| Technology | Radiofrequency (RF) |
To Next Page
