KneeRover GO User Manual

KneeRover
®
GO
Knee Scooter User Manual
Congratulations on your purchase of the KneeRover
®
GO
– The Most Compact & Portable Knee Scooter!
The KneeRover
®
GO is designed for the person on the go that
won’t let an ankle, foot or leg injury slow them down. Whether you
are a commuter, traveler, or just need a compact and portable
mobility device to go about your busy life– the KneeRover
®
GO will
give you the freedom you deserve during your recovery.
Operating Instructions:
This medical device is designed to maximize mobility during your
recovery from foot/ankle surgery or injury.
Place the knee of your injured leg on the knee platform and stand as
straight as possible. Adjust the handlebar to waist height so the arms and
hands are in a comfortable position. Adjust the knee platform so that
your injured leg is supported at a 90 degree angle when standing.
Ensure that the hand brake is fully engaged before mounting the
KneeRover
®
scooter. To move the scooter, simply push forwards or
backwards with your good foot. Allow the scooter to glide, and as it slows
down, push again.
Safety First:
The KneeRover
®
scooter is designed for easy steering and stopping and
should be used to carefully move about at slow, controlled speeds. When
turning the scooter, you should have the brake applied and be moving at a
slow, safe, controlled speed. It is easy to tip the scooter if you are making
a turn with too much speed. Use caution and balance and operate at your
own risk.
With routine use, nuts and bolts on steering column and brake
mechanism can and likely will become loose. Periodically check nuts and
bolts after use and re-tighten as appropriate.

KneeRover GO Specifications

General

Brand	KneeRover
Model	GO
Category	Wheelchair
Language	English

Summary

Operating Instructions

Proper Use and Adjustment

Positioning the injured leg, adjusting handlebars, and setting the knee platform height.

Propelling the Scooter

How to move the scooter forward or backward using your good foot.

Safety First

Safe Operation and Speed

Use caution with slow, controlled speeds and turning to maintain balance and prevent tipping.

Regular Maintenance Checks

Periodically check and re-tighten nuts and bolts on steering and brake mechanisms.

Set Up Instructions

Install Steering Column

Steps to attach the steering column, including securing the hinge lever correctly.

Rotate Front Wheels & Set Guide Pin

Aligning front wheels forward and setting the guide pin between stops for proper steering.

Setup Continued

Secure Center Frame Hinge

Connecting and locking the front and rear frame sections using the hinge pin and lever.

Install Knee Platform and Set Handlebar Height

Attaching the knee platform and adjusting handlebar height to the user's preference.

Brake Operation

Engaging and Locking the Brake

How to use the hand brake lever and its lock/parking brake feature.

Ongoing Maintenance

Periodic Inspection

Importance of inspecting and re-tightening nuts and bolts for safe operation.

Customer Support and Warranty

Customer Satisfaction

Commitment to providing mobility solutions and encouraging feedback.

Contact Information

Provides phone, email, and website for help and assembly support.

Limited Lifetime Warranty

Details warranty coverage for frames, cross braces, and exclusions like misuse.

Parts and Accessories

Information on purchasing accessories and original manufacturer parts.