Output Section
FX - Reverb
No pad sound is complete without being soaked overnight in a 24bit
stereo reverb. Just one knob controls both the amount of reverb and the
decay time of the reverb. Small values introduce a light room effect,
increasing to a hall all the way to a large cathedral mixed in equally with
the original sound."
External Input Jacks
Midi In
TRS Type-A midi input. Use the lead supplied to connect to a midi
keyboard or any other chord generating device that uses midi."
Trigger
Gate input with same functionality as the Trigger button."
Filt Freq
CV control of the filter cut-off frequency."
Chord Select
CV control to select one of the 8 chords stored in memory. The voltage at
this input denotes which chord memory will be used to save to or play
from the module."
V/Oct
1 volt per octave CV control of the unit. This affects the pitch of all 8 voices
at once and can be connected to an LFO or a generator of note pitches
such as an analogue CV sequencer."
To Next Page
Loading...