Need help?Do you have a question about the Knog NERD 9 and is the answer not in the manual?
General| Wireless | Yes |
|---|---|
| Display | LCD |
| Compatibility | Universal |
| Current Speed | Yes |
| Maximum Speed | Yes |
| Average Speed | Yes |
| Trip Distance | Yes |
| Odometer | Yes |
| Clock | Yes |
| Ride Time | Yes |
| Type | Cycling Computer |
| Battery Life | Up to 1 year |
| Functions | Odometer, clock |
Details the primary unit of the wireless cycle computer, including its mounting.
Describes the wireless transmitter unit that attaches to the bike's fork.
Explains the magnet that attaches to a spoke for speed detection.
Identifies and describes the function of the MODE (A) and SET (B) buttons.
Step-by-step guide for adjusting individual digits during data entry.
Procedure for initial setup and clearing all data before first use.
How to select between KM/H and M/H (Mile/hour) display units.
Instructions for setting the wheel circumference for accurate speed calculation.
Detailed method for measuring the wheel's circumference accurately.
Guide for entering existing odometer and total trip time data.
Procedure for setting the 12-hour AM/PM or 24-hour clock mode.
Steps to change or re-enter the wheel circumference setting.
Instructions for adjusting the current time setting.
How to select between two different bikes for circumference memory.
Displays the current speed while riding, up to 199.9 KM/H.
Shows the current time in either 12-hour AM/PM or 24-hour format.
Displays accumulated distance traveled since the last reset.
Shows the total riding time accumulated from the last reset.
Calculated average speed based on trip distance and riding time.
Records and displays the highest speed achieved since the last reset.
A gauge comparing current/average speed against the recorded maximum speed.
Displays accumulated distance traveled within a 24-hour period.
Shows the total accumulated riding time since the computer's initial use.
Displays the total distance traveled since the computer's initial use.
Cycles through all functions automatically every 5 seconds.
Indicates low battery power when the 'LOW' symbol appears.
Activates the display illumination for 5 seconds upon button press.
Used to advance through different display modes.
Used to enter setup screens for resetting bike circumference or time.
Resets AVG, TRIP DIST, TIMED TRIP, and MAX data to zero.
The unit automatically powers off to conserve battery after 15 minutes.
The computer automatically starts and stops data counting based on riding motion.
Instructions for activating and deactivating the display backlight feature.
To Next Page
