4
Morning Checklist
Verify the numbers on the Poll Pad,
printer & case match
Remove the contents of the case
Plug in & turn on printer
Attached Poll Pad to stand arm
Place stand arm in base
Attach ID clip to back of Poll Pad
Place 1 stylus in ID clip
Plug in Poll Pad
Power on the Poll Pad
Launch the Poll Pad application & verify that:
The Poll Pad is in the correct
polling location
Check-in count = 0
Printer icon is GREEN.
Press icon and ‘Test Print” button
Have a GREAT Election Day!
13
TROUBLESHOOTING
CHARGING POLL PAD
➊ Plug USB end of power cable into power cube
➋ Plug power cube into an AC wall outlet
➌ Plug power cable into Lightning Connector on Poll Pad
➍ Wait about five minutes for the Poll Pad to charge
➎ Once there is sufficient power, Poll Pad will auto power on
➏ Resume normal operations
NOTE: To confirm your unit is charging, verify battery icon is green and lightning bolt is displayed.
OPENING POLL PAD
➊ If application does not automatically launch when powered on, touch the Poll
Pad App at the bottom of the Home Screen
➋ Verify your county’s homepage displays on screen
To Next Page
