ABOUT THIS CO ALARM
Model 7000 – Battery (DC) powered unit features a sealed-in,
non-removable / non-replaceable battery.
Model 7200 – Direct Plug-In (AC) unit 120VAC~, 60Hz, 0.01A, 3V
with a sealed-in, non-removable / non-replaceable lithium
battery for backup.
Once each model reaches the end of its service life, or after
10-years – whichever comes first – the unit will alert you that it
needs to be replaced, and you will need to install a new CO
alarm.
Sensor:
Electrochemical
Sensor life:
10 years
Alarm Response Times:
CO sensor will not alarm to levels of CO below 30 ppm and will
alarm in the following time range when exposed to the
corresponding levels of CO
• 70 ppm CO Concentration 60 –240 minutes
• 150 ppm CO Concentration 10 –50 minutes
• 400 ppm CO Concentration 4 –15 minutes
Product Warranty:
10-Year product life and warranty
Temperature:
Operating range shall be between 40ºF and 100ºF (4ºC and
38ºC)
Humidity:
Operating range shall be 10% -95% non-condensing relative
humidity.
Audible Alarm:
85dB at 10’, piezoelectric sounder
Separate speaker produces directions in the event of a status
change.
See “Alarm Notifications” section for additional details.
Display:
Digital display produces directions in the event of a status
change.
See “Alarm Notifications” section for additional details.
2
To Next Page
Loading...
Need help?
General