EasyManua.ls Logo

KnoxGear KN-PAS02 - Safety Instructions; Usage Tips

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
This product contains no user-serviceable parts. All servicing must
be performed by a qualified technician.
Connect the product only to properly grounded outlets with the
appropriate power supply.
Do not remove or tamper with the housing of the unit; doing so
increases risk of electric shock.
Do not expose the product to high temperatures, moisture, or
electricity.
Do not use the product near exposed flames.
The maximum operating temperature is 113°F.
Clean with a dry cloth only. Clean the product only as recommended
by the manufacturer.
Unplug the unit when not in use.
To establish a safe volume level, start the volume at the lowest setting
and slowly increase it until you can hear the sound comfortably,
clearly, and without distortion.
Use a suitable means of transportation when moving the product.
SAFETY INSTRUCTIONS
Once a Bluetooth device has been paired, there is no need to pair it
again.
If the speaker is connected to a Bluetooth device and there is no
sound, turn off all nearby devices and only allow one device to
connect with the speaker.
Always ensure that USB devices/SD cards are inserted correctly and
in the proper direction. To avoid damage, always insert cards gently.
Before turning off the speaker, remove the USB/SD device.
USAGE TIPS

Related product manuals