5
13. Microphone Input: 1/4” connector for an unbalanced microphone or
instrument.
14. Line Input: Allows you to connect an external audio device through
the RCA connector.
15. Overload Indicator: If this red LED light is constantly illuminated,
turn down the volume.
16. Power Indicator: Light indicates that the power is on.
17. 115-230 V Selector: Selects the voltage.
18. AC Power: Allows you to connect an AC power cord.
19. LED Lights Power: Allows the LED lights to be turned on or off. The
LED lights only work when the music is at a certain volume. If the
lights don’t turn on, try increasing the volume.
20. On/Off Power Switch: Turns the power on or off.
21. Speaker Output: Allows you to connect the active speaker to the
passive speaker.
CONTROL PANEL
To Next Page
