Knuth R32 Basic - 1 Main Application and Feature; 2 Main Parameter and Dimension

Machine Tools OPERATING INSTRUCTIONS
3
1、Main application and feature
1.1 Application
：
This machine is widely suitable for machinery processing. That is drilling、scrape、
ream and tapping. Under certain conditions, it also can boring hole.
1.2 Feature：
1. Appearance is bounteous. The total layout is proportional。
2 Mechanical speed change which easily operation。
3．The surface of guide takes the quench treatment, which prolong the longevity of
machine’s operation.
4．There are a set of safety defense system 。
5．The electric system is reliable. It must according to relevant stipulate. 6．Reliable
Structure, good manufacture and high precision.
2、Main parameter and dimension
2.1 Main parameter
Max. drilling diameter： 32mm
Tape： MT4
Number of spindle speeds： 6
Range of spindle speeds： 75～1220 r/min
Number of spindle feeding： 3
Range of spindle feeding： 0.10～0.25 mm/r
Speed of arm elevating： 1.21m/min
Angle of arm： 360°
Max. distance of spindle： 200 Nm
Max. feeding power of spindle allowed： 6300 N
Main motor power： 1.5 KW
Arm elevating motor power： 0.55 KW
Cooling motor power： 0.09 KW
Weight： 1200 Kg