ASSEMBLY INSTRUCTIONS
2
1.
Slide preassembled screws into key slots
of top back panel (A) to connect top back
panel (A) to top middle back panel (K).
Tighten the screws. Repeat process to
connect bottom middle back panel (L) to
top middle back panel (K) and bottom
back panel (M) to bottom middle back
panel (L).
Note: Be sure to keep the backs on a soft
surface, such as carpeting or a piece of
cardboard, to protect them from scratches.
2.
Slide preassembled screws into key
slots of the assembled unit from Step 1
to connect left side (B) and right side
(C) to the assembled unit. Tighten the
screws.
B
M
L
K
A
C
M
L
K
A
1
B
M
5
Lowes.com
To Next Page
Loading...
