Kobalt 19156 - Page 7

ASSEMBLY INSTRUCTIONS
7
Hardware Used
EE
x 4
M8 Nut
3. If you plan to stack the chest (Item
#5071908, sold separately) onto the
cabinet (A), please follow the below
step. Otherwise, forget this step.
Remove the cabinet mat (B), unload the
bottom drawers from the chest and the
top drawer from the cabinet (A) using
the method on Operating Instructions
(Page 8). Insert M8 x 25 mm bolts (BB)
from the bottom of the chest into the top
of the cabinet (A) and tight with M8 nuts
(EE). Install the 2 unloaded drawers
back using the method on Operation
Instructions (Page 8).
BB
x 4
M8 x 25 mm Bolt
A
EE
BB
3