To Next PageTo Next PageWhat to do if my Kobalt 6904 Impact Driver does not work?
If your Kobalt Impact Driver isn't working, first ensure that all plugs are fully connected. Then, check that the power source voltage is 120V.
What to do if fasteners cannot be loosened with Kobalt Impact Driver?
If fasteners cannot be loosened with your Kobalt Impact Driver, it's likely that the torque required exceeds the tool's capacity. The suggested solution is to use a more powerful wrench.
Why can't fasteners be loosened with my Kobalt 6904 Impact Driver?
If fasteners cannot be loosened with your Kobalt Impact Driver, it may be because the torque required exceeds the tool’s capacity. In this case, use a more powerful wrench.
General| Impacts Per Minute (IPM) | 0-4000 |
|---|---|
| No Load Speed (RPM) | 0-2700 |
| Brushless | Yes |
| Maximum Torque (in-lbs) | 1800 |
| Voltage | 24V |
| Chuck Size | 1/4 inch |
| Battery Type | Lithium-ion |
| Chuck Type | Hex |
Familiarize yourself with the impact wrench's features and safety requirements before operation.
Essential safety guidelines for operating power tools to prevent accidents and injuries.
Maintain a safe workspace and follow electrical precautions to avoid hazards.
Steps to ensure operator safety, including alertness, PPE, and preventing unintentional starts.
Proper usage and maintenance guidelines for power tools.
Detailed safety instructions specific to operating the impact wrench.
Guidance on choosing the appropriate socket size for the tool.
Instructions on how to attach and detach sockets from the impact wrench.
Steps to turn the impact wrench on for forward or reverse operation.
Techniques and considerations for proper tightening using the impact wrench.
Procedures and torque considerations for loosening fasteners.
Pre-operation checks to ensure the tool is safe and functional.
Common causes and solutions when the impact wrench fails to operate.
Reasons why fasteners might not loosen and potential solutions.
