12
OPERATING INSTRUCTIONS
7. Using with Flush Circular Blade
WARNING
• Always wear safety goggles or safety glasses with
side shields during power tool operation. If operation is
dusty, also wear a dust mask.
• Wear protective gloves.
• Use sharp, undamaged blades only. Deformed or blunt
blades or blades that are otherwise damaged can
break.
NOTICE: The protrusion on the drive shaft and the
grooves in the accessory permit the accessories to be
installed around the tool in 30° increments.
WARNING
• Do not attach the ush circular blade facing backward,
as operation in this position may cause serious injury
(Fig. 7a).
The ush circular blade (I) is ideal for making cuts in
wood, plaster, drywall, non-ferrous metals, thin sheet
metal and other materials. The blade works best on
softer woods, such as pine. For harder woods, the blade
life will be limited.
7a
7b
To Next Page
Loading...
Need help?
General
