Kobalt KLDP1 User Manual

1
ITEM #0791911
12 VOLT / 120 VOLT
DUAL POWER INFLATOR
MODEL #KLDP1
Français p. 8
Español p. 16
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-888-3KOBALT, 8:00 a.m. – 8:00 p.m., ET, Monday – Friday.
AB16155

Kobalt KLDP1 Specifications

General

Brand	Kobalt
Model	KLDP1
Category	Power Tool
Language	English

Summary

SAFETY INFORMATION

General Safety Precautions

General safety guidelines regarding work area, hazardous atmospheres, and bystander safety.

Product Specifications

Details on model, voltage, pressure, and critical warnings about using correct voltage sources.

PREPARATION

Pre-Operation Steps

Steps for preparing the inflator and vehicle, including outlet checks, battery, ventilation, and cord selection.

OPERATING INSTRUCTIONS 12 VOLT DC MODE

DC Mode Operation

Procedure for operating the inflator using a 12-volt DC power source, including connection and pressure setting.

OPERATING INSTRUCTIONS 120 VOLT AC MODE

AC Mode Operation

Procedure for operating the inflator using a 120-volt AC power source, including connection and pressure setting.

CARE AND MAINTENANCE

Cleaning and Care

Instructions for cleaning the inflator's plastic parts and advice on preventing moisture ingress.

TROUBLESHOOTING

Common Issues and Solutions

Guidance on identifying and resolving common problems, such as the unit failing to start.

REPLACEMENT PARTS LIST

Parts Information and Ordering

Details on available replacement parts and contact information for ordering from customer service.