To Next PageTo Next PageWhat to do if the LED worklight on my Kobalt BRUSHLESS KMT 124B-03 blinks rapidly?
If the LED worklight on your Kobalt Power Tool blinks rapidly, it indicates the tool has stopped working to protect its internal circuits. To resolve this, turn the tool OFF, allow it to cool down, and then restart it.
Why is my Kobalt BRUSHLESS KMT 124B-03 Power Tool making a loud noise and vibrating?
If you experience strong vibration or loud noise during operation of your Kobalt Power Tool, it is likely that the accessory is not installed securely. Reinstall the accessory.
Why is the LED worklight on my Kobalt BRUSHLESS KMT 124B-03 Power Tool blinking slowly?
If the LED worklight on your Kobalt Power Tool blinks slowly, it means the battery charge is very low. To fix this, charge the battery.
Why is my Kobalt Power Tool overheating?
If your Kobalt Power Tool motor is overheating, it's possible that the cooling vents are obstructed. Clean and clear the vents to ensure proper airflow. Also, avoid covering the vents with your hand during operation.
General| Voltage | 24V |
|---|---|
| Motor Type | Brushless |
| Battery Type | Lithium-Ion |
| Battery Capacity | 4.0 Ah |
| Chuck Size | 1/2 inch |
| Brushless Motor | Yes |
Understand the tool by reading the manual and labels before use.
Covers general power tool, work area, and electrical safety precautions.
Focuses on user's personal safety and proper power tool operation and care.
Addresses battery handling, tool servicing, and multi-tool specific safety.
Familiarize yourself with the multi-tool's features and safety requirements before use.
Steps for securely attaching and safely removing the battery pack.
How to operate the On/Off switch to power the multi-tool on and off.
How to adjust the oscillating speed using the variable-speed dial (1-6).
Explanation of the LED work light function and its blinking indicators.
Detailed steps for installing and removing various accessories from the multi-tool.
Instructions and safety for using the plunge-cut blade for precision cuts.
Guidance and safety for using the flush circular blade for cutting various materials.
Steps and safety for using the grout-removal blade to remove grout and cut masonry.
Instructions and safety for using the rigid scraper blade to remove finishes and flooring.
How to use the sanding base plate set for effective sanding applications.
Instructions for cleaning the multi-tool using a soft, dry cloth.
