To Next PageTo Next PageWhy does the blade bind, jam, or burn the wood when using my Kobalt Power Tool?
If the blade binds, jams, or burns the wood when you are using the Kobalt Power Tool, it may be due to improper operation or using a dull or improper blade. Refer to the “OPERATING INSTRUCTIONS” section. You may also need to replace the blade with a new one.
What to do if my Kobalt KJS 324B-03 Power Tool saw vibrates or shakes?
If your Kobalt Power Tool saw vibrates or shakes, it could be due to a damaged or loose blade. Try replacing the blade. If that doesn't solve the problem, remove the blade and reinstall it securely.
General| Cord Length | 6 ft |
|---|---|
| Blade Change | Tool-Free |
| Variable Speed | Yes |
| Case Included | No |
| Voltage | 120 V |
Read the manual and tool labels before use for future reference.
Familiarize yourself with the jig saw's operating features and safety requirements before use.
Learn how to properly install the battery pack onto the jig saw before operation.
Understand how to use the variable-speed trigger and switch-lock for power control.
Understand the function and operation of the LED work light for illumination.
Learn to adjust the orbital-function lever for optimal cutting performance.
Understand how to use the dust-blowing lever for sawdust management.
Learn how to adjust the base-plate bevel angle for various cuts.
Follow instructions for safely installing and removing the jig saw blade.
Learn how to install and use the edge guide for accurate cuts.
Understand the general process for making cuts with the jig saw.
Learn the procedure for performing plunge cuts with the jig saw.
Learn how to clean the jig saw safely and properly using a soft, dry cloth.
