kobalttools.com
27
CARE AND MAINTENANCE
CAUTION
A dull or improperly sharpened chain can cause excessive
motor speed during cutting, which may result in severe
motor damage.
WARNING
• Improper chain sharpening increases the potential of
kickback.
• Failure to replace or repair a damaged chain can
cause serious injury.
Topplatelingangle
• CORRECT 30° – le holders are marked with guide
marks to align le properly to produce correct top plate
angle.
• LESS THAN 30° – for cross cutting.
• MORE THAN 30° – feathered edge dulls quickly.
30°
80°
TOP PLACE FILLING ANGLE
SIDE PLATE FILLING ANGLE
CORRECT INCORRECT
LESS THAN 30° MORE THAN 30°
Left hand
Cutters
Right hand
Cutters
To Next Page
Loading...
Need help?
General
