kobalttools.com
31
CARE AND MAINTENANCE
• After lowering each depth gauge, restore original
shape by rounding the front. Be careful not to damage
•
•
adjusting depth gauges.
Maintaining the guide bar
Every week of use, reverse the guide bar on the saw to
distribute the wear for maximum bar life. The bar should
be cleaned every day of use and checked for wear and
damage. Feathering or burring of the bar rails is a normal
process of bar wear. Such faults should be smoothed
following faults should be replaced:
• Wear inside the bar rails that permits the chain to lay
over sideways
• Bent guide bar
• Cracked or broken rails
• Spread rails
Lubricate guide bars after each use with a sprocket at
their tip. Using a grease syringe, lubricate weekly in the
lubricating hole. Turn the guide bar and check that the
lubrication holes and chain groove are free from
impurities.
Restore
Original shape
by Rounding
the front
Lubricating hole
Transport
Storage
When storing or transporting the chainsaw, always place the protective cover over the chain saw blade.
• Ensure the battery is removed from the chainsaw.
• Wipe any debris off of the chainsaw, including built up wood chips under the chain cover.
• Store in a dry cool place out of the reach of children.
• Store with the scabbard on to prevent damage to the chain and potential damage to other.
To Next Page
Loading...
Need help?
General
