19
CARE AND MAINTENANCE
• Using the wrench (Q) on the chain tension screw (M),
turn clockwise.
• Turn clockwise until there is enough play that the chain
can be pulled away from the bar, but not so much that
the runners can be pulled out of the bar.
• Once you have the correct tension, fully tighten the
locking knob.
Note:
Chains stretch with use. Check tension often.
Never tension a warm chain before storing, as chains
shrink when cool. This can damage chain, bar and saw.
M
Q
O
P
To Next Page
Loading...
Need help?
General
