23
CARE AND MAINTENANCE
Left Hand
Cutters
Right Hand
Cutters
• Using light but rm pressure, stroke towards the front
corner of the tooth. Lift le away from the steel on each
return stroke.
• Put a few rm strokes on every tooth. File all left hand
cutters in one direction. Then move to the other side and
le the right hand cutters in the opposite direction.
• Remove lings from the le with a wire brush.
CAUTION
Dull or improperly sharpened chain can cause excessive
motor speed during cutting which may result in severe
motor damage.
WARNING
Improper chain sharpening increases the potential of
kickback. Failure to replace or repair damaged chain can
cause serious injury.
To Next Page
Loading...
Need help?
General
