EasyManuals Logo

Kobalt KPS 1081-06 User Manual

Kobalt KPS 1081-06
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
SAFETY INFORMATION
Use only Kobalt charger (KRC 80-06, KRC 30-06).
POLE SAW SAFETY WARNINGS
Keep all parts of the body away from the saw chain. Do not remove cut material or hold
material to be cut when blades are moving. Make sure the switch is off when clearing
jammed material. Saw chain continues to move after the switch is turned off. A moment of
inattention while operating the extended-reach pruner may result in serious personal injury.
Carry the pole saw by the handle with the saw chain stopped. When transporting or storing
the pole saw, always t the saw chain device cover. Proper handling of the pole saw will
reduce possible personal injury from the saw chain.
Hold the pole saw by insulated gripping surfaces only, because the saw chain may contact
hidden wiring. A saw chain contacting a ″live″ wire may make exposed metal parts of the
pole saw ″live″ and could give the operator an electric shock.
Do not use the pole saw in bad weather conditions, especially when there is a risk of
lightning. This decreases the risk of being struck by lightning.
To reduce the risk of electrocution, never use near any electrical power lines. Contact with or
use near power lines may cause serious injury or electric shock resulting in death.
Always use two hands when operating the extended-reach pruner. Hold the extended-reach
pruner with both hands to avoid loss of control.
Always use head protection when operating the extended-reach pruner overhead. Falling
debris can result in serious personal injury.
Prevent unintentional starting. Ensure the power switch is in the off-position before
connecting to battery pack, picking up or carrying the appliance. Carrying the appliance
with your nger on the power switch or energizing appliance that have the power switch on
invites accidents.
Make sure the power switch is off and the battery pack is removed before clearing jammed
material, making adjustments, changing accessories, storing or servicing the appliance.
Unexpected actuation of the appliance while clearing jammed material or servicing may
result in serious personal injury.
Recharge only with the charger specied by the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of re when used with another battery pack.
Use appliances only with specically designated battery packs. Use of any other battery
packs may create a risk of injury and re.
When battery pack is not in use, keep it away from other metal objects like paper clips,
coins, keys, nails, screws or other small metal objects that can make a connection from one
terminal to another. Shorting the battery terminals together may cause burns or a re.
Under abusive conditions, liquid may be ejected from the battery; avoid contact with it.
If contact accidentally occurs, ush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or appliance that is damaged or modied. Damaged or
modied batteries may exhibit unpredictable behavior resulting in re, explosion or risk
of injury.
Do not expose a battery pack or appliance to re or excessive temperature. Exposure to
re or temperature above 265°F may cause explosion.
Follow all charging instructions and do not charge the battery pack or appliance outside
of the temperature range specied in the instructions. Charging improperly or at
temperatures outside of the specied range may damage the battery and increase the
risk of re.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kobalt KPS 1081-06 and is the answer not in the manual?

Kobalt KPS 1081-06 Specifications

General IconGeneral
BrandKobalt
ModelKPS 1081-06
CategoryPole Saw
LanguageEnglish

Related product manuals