W
Whitney ThompsonJul 31, 2025
Why is my Kobalt Drill not working?
- SStacy DavisAug 1, 2025
If your Kobalt Drill isn't working, the battery may be depleted. Try charging the battery.
To Next PageTo Next PageWhy is my Kobalt Drill not working?
If your Kobalt Drill isn't working, the battery may be depleted. Try charging the battery.
What to do if my Kobalt KT300A motor is overheating?
If the motor of your Kobalt Drill is overheating, the cooling vents may be obstructed. Clean and clear the vents, and avoid covering them with your hand during operation.
General| Voltage | 24-volt |
|---|---|
| Maximum Speed | 2000 RPM |
| Brushless Motor | Yes |
| Torque | 650 in-lbs |
| Battery Type | Lithium Ion (Li-Ion) |
| Max Torque | 650 in-lbs |
| Chuck Size | 1/2 inch |
| No Load Speed | 0-2, 000 RPM |
Focuses on user alertness, protective equipment, and safe handling.
Details correct usage, care, and storage of the tool.
Instructions for safe charging and use of battery packs.
Critical safety measures specific to operating the cordless drill/driver.
Step-by-step guide for connecting and removing the battery pack.
Comprehensive steps for performing drilling tasks effectively and safely.
Detailed instructions for driving screws, including pilot holes and torque.
