To Next PageTo Next Page
Need help?Do you have a question about the Kobalt KHD 524B-03 and is the answer not in the manual?
General| Voltage | 24V |
|---|---|
| Chuck Size | 1/2 inch |
| Maximum Speed | 2000 RPM |
| Brushless | Yes |
| Number of Speed Settings | 2 |
| Torque | 650 in-lbs |
| Battery Type | Lithium-Ion |
| No Load Speed | 0-550/0-2000 RPM |
Essential safety advice, including eye protection and warnings about chemicals in California.
Explanation of symbols used on the tool and in the manual for clarity and safe operation.
Covers safe work area practices and essential electrical safety precautions for power tools.
Guidance on user alertness, personal protective equipment (PPE), and proper attire.
Instructions on correct tool usage, maintenance, and avoiding hazards during operation.
Guidelines for safe charging, usage, and storage of battery packs to prevent injury and fire.
Tool-specific safety advice for hammer drill operations, including noise and workpiece security.
Familiarize yourself with the hammer drill's features and safety requirements before use.
Step-by-step guide for attaching and detaching the battery pack from the tool.
How to operate the variable-speed trigger for ON/OFF and speed control, including electric brake.
Instructions on using the two-speed gear box for different drilling and driving tasks.
How to use the forward, center-lock, and reverse selector for bit rotation control.
Information on the LED work light function, including status indicators for the tool.
How to use the keyless chuck to tighten and release drill bits securely.
How to set the mode selector for driving, drilling, or hammer drilling applications.
How to adjust the torque clutch for 24 settings in driving mode for proper fastening.
Instructions for attaching and removing the belt clip using screws.
Instructions for attaching and removing the bit holder using screws.
How to install, remove, and use the auxiliary handle for better control and comfort.
Detailed steps for safely installing and removing drill bits from the keyless chuck.
Guidance on drilling wood and metal, including bit selection and speed adjustments.
Instructions for masonry drilling, including bit choice, speed, and pressure for different materials.
Steps for efficient screw driving, including pilot holes, torque settings, and driver bits.
Instructions for cleaning the tool using a soft, dry cloth, avoiding detergents.
Detailed procedure for removing and replacing the chuck using specific tools and methods.
A table listing common issues, their possible causes, and corrective actions.
