To Next PageTo Next PageWhy is my Kobalt Drill motor overheating?
If the Kobalt Drill's motor is overheating, it's likely because the cooling vents are blocked. Make sure to clean and clear the vents, and avoid covering them with your hand while you're using the drill.
General| Voltage | 24V |
|---|---|
| Chuck Size | 1/2 inch |
| Max Torque | 650 in-lbs |
| Speed | 2-speed |
| Battery Type | Lithium-ion |
| Brushless | Yes |
| No Load Speed | 0-550 / 0-2, 000 RPM |
Warns about eye damage from flying objects and hazardous chemicals in dust.
Emphasizes reading the manual and that servicing requires qualified technicians.
Advises on maintaining a clean work area and precautions for electrical safety.
Details personal safety measures, PPE, and proper power tool usage and care practices.
Covers battery safety, charging, specific warnings for the hammer drill, and servicing requirements.
Encourages familiarization with the tool's features and safety requirements before operation.
Warns against modifying the tool or using unauthorized accessories, which can lead to hazardous conditions.
Instructions for attaching and detaching the battery pack from the tool.
Explains how to use the selector for forward, reverse, and lock functions.
Details operation of the variable-speed trigger and the automatic electric brake.
Explains how to select and use the two-speed gear box for different applications.
Instructions on how to use the keyless chuck to tighten or release drill bits.
Explains how to set the mode selector for driving, drilling, or hammer drilling.
Details how to adjust the torque for driving screws and its importance.
Describes the function and indicators of the LED worklight.
Instructions for installing and using the belt clip and auxiliary handle.
Details installing/removing bits and the steps for the drilling operation with safety warnings.
Provides guidance for drilling wood, metal, and masonry materials.
Instructions for driving screws, including mode and torque settings.
Instructions for cleaning the tool and its ventilation slots.
Details the procedure for removing and replacing the chuck.
Lists common issues like tool not working or overheating and their corrective actions.
Outlines the warranty period, coverage, and claims process for the product.
