Kobalt SC2502LW - Page 29

29
To extend the stand (Fig. 25, 26):
● Step on the release lever (1) and pull the
left and right handles (O & P) toward you
simultaneously. (Fig. 25)
● Once the stand is released from the foot
release lever (BB), ease the stand toward the
oor by pushing the handles toward the oor.
● With your hands on the left and right
handles (O & P), push the stand towards
the ground until the saw is in an extended
position. (Fig. 26)
NOTE: The foot release lever will close over
the pin locking the stand in an extended
position.
25
BB
P
O
26
P
O
BB