Kobalt SGY-AIR134 User Manual

ASSEMBLY INSTRUCTIONS
9
2
3
1
1. Remove the air inlet protective cap from the
air inlet (E). (See Figure 1)
2. Mount a male plug (not included) by hand
into the air inlet (E). (See Figure 2)
3. Place 2 - 3 drops of air tool oil (not included)
into the male plug before each use.
(See Figure 3)
NOTE Use thread sealant tape (not included) on
the male plug and tighten it with a wrench (not
included) for airtight connection. Do not
overtighten.

Kobalt SGY-AIR134 Specifications

General

Brand	Kobalt
Model	SGY-AIR134
Category	Impact Driver
Language	English