2
TABLE OF CONTENTS
Safety Information..........................................................................................3
Compressor Requirements.............................................................................2
Package Contents..........................................................................................9
Product Specifications....................................................................................3
Preparation...................................................................................................10
Assembly Instructions...................................................................................10
Operating Instructions..................................................................................12
Care and Maintenance.................................................................................13
Troubleshooting............................................................................................14
Warranty.......................................................................................................15
COMPRESSOR REQUIREMENTS
4.5
SCFM
90
PSI
Tool Requirements
Exigences relatives aux outils
Requisitos de herramientas
@
IMPORTANT: To operate correctly, this tool requires airflow that is at least 4.5
cubic feet per minute (SCFM) at 90 pounds per square inch (PSI). Check the
specifications of your air compressor to be sure that it can support both the
minimum SCFM and PSI required. The air hose length could affect how
much air pressure the tool is actually receiving. You may need to adjust the
air pressure higher on the air regulator to achieve the working pressure of
90 PSI.
To Next Page
Loading...
Need help?
General
