2
TABLE OF CONTENTS
Safety Information..........................................................................................3
Compressor Requirements.............................................................................2
Package Contents..........................................................................................9
Product Specifications....................................................................................3
Preparation...................................................................................................10
Assembly Instructions...................................................................................10
Operating Instructions..................................................................................11
Remove Sanding Pad..................................................................................12
Care and Maintenance.................................................................................13
Troubleshooting............................................................................................14
Warranty.......................................................................................................15
COMPRESSOR REQUIREMENTS
5.2
SCFM
90
PSI
Tool Requirements
Exigences relatives aux outils
Requisitos de herramientas
@
IMPORTANT: To operate correctly, this tool requires airflow that is at least 5.2
Standard Cubic Feet per Minute (SCFM) per minute at 90 pounds per square
inch (PSI). Check the specifications of your air compressor to be sure that it
can support both the minimum SCFM and PSI required. The air hose length
could affect how much air pressure the tool is actually receiving. You may
need to adjust the air pressure higher on the air regulator to achieve the
working pressure of 90 PSI.
To Next Page
Loading...
Need help?
General
