Power Lamp
Call Button
Handset
A- Choose a place on the wall where you
want to hang the Indoor station.
B- Fasten the wall hanger on the wall.
C- Indoor station can be hung on the wall
hanger easily now.
Pick up the handset and communicate
with a visitor. After end of communication,
return the handset where it is locked
The subdoor station is
ringing.
Keep away from humidifier and
stove. High temperature and
humidity can cause malfunction
When cleaning, never use wet
hands, volatile benzene or paint
thinner.
Maintain the product clear by
frequently cleaning with soft
cloths
As this device consists of precise electronic components, and high voltage is generated
internally, do not attempt to disassemble.
Do not drop lndoor station, and
avoid strong impact.
Precautions for Operation
Installation
Specifications
How to operate (Instruction for operating)
Name of Each Part
When a visitor
pushes the maindoor
station bell,
Wring Diagram
Component
Description DP-201P AC DP-201P DC
Electric source AC DC 6V(LR6-AA 1.5V X 4)
Consumption In use 30mA,Signal 150mA In use 30mA,Signal 150mA
Signal Sound Electronic Chime Electronic Chime
Wiring 2Wired non-polarity 2Wired non-polarity
Range 300m(
0.65mm) 300m( 0.65mm)
Master station for Maindoor-use Substation for Subdoor-use Wall hanger for master station
1B
2Y
1B
2Y
To Previous Page
Loading...
