A-63055 December 1999 29
4. Check the
Enable Barcode
box.
5. Select the barcode region in the
Barcode Settings For
drop-down
list box.
Ten regions can be specified: five front barcodes (Front #1-Front
#5) and five back barcodes (Back #1-Back #5).
6. Select a measurement in the
Units
drop-down list box in pixels,
mm, or inches.
7. Select the barcode in the
Barcode Type
drop-down list box.
8. Choose the direction of the barcode (Forward Search or Reverse
Search) in
Barcode Search Direction
.
*0000000*
*0000000*
Forward Search Reverse Search
To Next Page