Getting Started
You can set the standby timeout from 10 – 30 minutes. The default setting is 15 minutes.
1 Press Menu to display the main menu.
2 Press b until Control Panel Settings is selected.
3 Press OK. The Power Settings menu is displayed with Minutes to Standby selected.
4 Press _ or ` to change the standby timeout period.
5 Press OK.
Date and Time
Your Kodak EasyShare All-in-One contains a clock for stamping the date and time on scans to a memory
card and faxes.
1 Press Menu to display the main menu.
2
Press b until Date and Time is selected.
3
Press OK to go to the Date and Time menu.
4
Press _ or ` to set the Year.
5
Press OK.
6
Press _ or ` to set the Month.
7
Press OK.
8
Press _ or ` to set the Day.
9
Press OK.
10
Press _ or ` to set the Hour.
11
Press OK.
12
Press _ or ` to set the Minute.
13
Press OK.
Set Language
You can select the language the EasyShare AiO uses for the LCD display.
1 Press Menu to display the Main Menu.
2 Press b until Language is displayed.
3 Press OK to go to the Select Language menu.
4 Press b until the language you want is selected.
5 Press OK.
Reset All Settings
You can restore the original factory settings to your Kodak EasyShare All-in-One.
NOTE: Restoring the factory defaults will not change the date and time information you set.
User’s Guide 23
To Next Page
Loading...
