6
Use KODAK
ADVANTIX Film
ATTACHING THE STRAP
1. Insert the shorter looped end of the
strap behind the STRAP POST (22).
2. Thread the longer end of the strap
through the shorter loop.
3. Pull the strap tight.
LOADING THE BATTERY
This camera uses one 3-volt lithium
KODAK K123LA (or equivalent) Battery
that supplies power for all camera
operations.
1. Open the
BATTERY
DOOR
(17).
• Before you
remove the
old battery,
turn the
camera off.
2. Insert the
battery into
the chamber
as shown.
3. Snap the
battery door
closed.
• After you
load a new
battery into the camera, you will
need to reset the date and time.
To Next Page
Loading...
Need help?
General
