Kodak Advantix C650 User Guide

8
LOADING THE FILM
You can load film into the camera with
the camera ON or OFF.
1. Move the
FILM-DOOR
LATCH
(21) to
open the
FILM
DOOR
(24).
• The film
door will
open only
when the film chamber is empty or
the film in the camera is completely
rewound into the film cassette.
2. Insert the film cassette completely
into the FILM CHAMBER (23).
• Make
sure the
Film
Status
Indicator
(FSI) on
the film
cassette
is at ●
(#1 position) for a new cassette.
• Do not force the film cassette into
the film chamber.
3. Close the film door to start the auto-
film advance. The FRAME COUNTER (30)
on the LCD PANEL (5) will show the
number of frames remaining on the
film cassette.
• After you close the safety-interlocked
film door, you cannot open the door
until the film is completely rewound
into the film cassette.
OPEN
ON
OFF
4
3
2
1
ON
OFF
OPEN

Kodak Advantix C650 Specifications

General

Brand	Kodak
Model	Advantix C650
Category	Film Camera
Language	English