16
USING THE SELF-TIMER
Use this feature to include yourself
in pictures.
1. Use the TRIPOD SOCKET (25) to attach
the camera to a tripod or place it on
another firm support.
2. Move the ON/OFF SWITCH (20) to the
“ON” position to turn the camera on
and to raise the FLASH (9).
3. Press the SELF-TIMER BUTTON (6).
4. Frame your picture in the VIEWFINDER
EYEPIECE
(19).
5. Press the SHUTTER BUTTON (16). The
SELF-TIMER LAMP (13) on the front of
the camera will blink and then glow
during the last two seconds of
countdown.
• To cancel the self-timer selection
before the shutter releases, turn the
camera off.
• The self-timer automatically turns off
after the shutter releases and returns
to the auto-flash start position.
Night-view
In this mode, the camera balances the
flash and existing light exposure so you
can take beautiful pictures of people at
sunset or at night. Use a tripod or place
the camera on another firm support, and
use high-speed film because the shutter
speed at night will most likely be slow.
1. Move the ON/OFF SWITCH (20) to the
“ON” position to turn the camera on
and to raise the FLASH (9).
2. Press the FLASH-MODE BUTTON (7)
repeatedly until the NIGHT-VIEW
INDICATOR
(28) appears on the LCD
PANEL
(5).
3. Frame your subject within the
VIEWFINDER EYEPIECE (19).
4. Partially depress the SHUTTER
BUTTON
(16). When the FLASH/CAMERA-
READY LAMP (18) glows green, fully
depress the shutter button to take
the picture.
To Next Page
Loading...
Need help?
General
