Doing more with your camera
20 www.kodak.com/go/support
Using the camera under water
To prevent the camera from sinking, secure it with the strap.
(See a floating strap at www.kodak.com/go/accessories.) To
keep the camera waterproof, tightly close and latch all doors.
Do not open doors in water or when hands are wet.
Waterproof integrity may be compromised if the camera is
dropped. For more information, see page 25.
For the best focus and color balance under water:
1 Press the Settings button , then choose Underwater
Correction. Press OK.
2 Press to choose On, then press OK.
3 Press the Mode button , then take videos/pictures.
4 When finished taking underwater videos/pictures, go back
to Step 1 and turn Underwater Correction off.
After using the camera in water
■ Wipe off water or debris. If the camera was used in
chemically treated water or saltwater, rinse it in fresh water,
then use a soft towel to dry it.
■ If water has entered the camera, remove the card. Allow
camera to air-dry for at least 24 hours before using.
Keep doors watertight
see page 2
urg_01216.book Page 20 Friday, March 18, 2011 12:37 PM
To Next Page
Loading...
Need help?
General
