Kodak Carousel S-AV 1050 User Manual

Integrated power cord, approximately 2.2 meters long.

Multi-purpose 6-pin connector for accessories and remote controls.

Controls for advancing slides forward, reverse, and selection.

Knob and indicator for achieving sharp image focus.

Location of the main power switch and cooling fan vent.

Designated location for attaching infrared remote control receivers.

Controls for vertical mirror and horizontal lamp alignment.

Positions for standard and special condenser lenses for various slide formats.

Universal carrier for lenses and a portable carrying handle.

Adjustable foot for leveling and switch to enable/disable autofocus.

Switch for managing internal or external projector lamp control.

Connector for external control units and accessories.

Points to front flap diagrams illustrating key operating stages 1-8.

Crucial check of projector voltage against mains supply before connection.

Guidance on unwinding the captive mains lead prior to projector setup.

Advice on positioning the projector on a stable surface with adequate ventilation.

Specifies projector compatibility with slide sizes and thickness, recommending consistent mounting.

Instructions for loading slides into the KODAK CAROUSEL Slide Tray.

Lists suitable KODAK RETINAR S-AV lenses and notes incompatible older types.

Guide on using standard and special condenser lenses for different slide formats and lenses.

Procedure for adjusting lamp filament position for optimal brightness and durability.

Explains the 'Int' and 'Ext' settings for controlling projector lamp output.

Connecting to mains power and adjusting projector height with its feet.

Methods for achieving a sharp projected image using lens or focusing knob.

Details on the autofocus system and advice for maintaining focus consistency.

How to change slides using the projector, remote control, or interval timer.

Steps for safely removing and replacing the slide tray, including emergency procedures.

Instructions for enabling continuous projection with an additional slide.

Using tape recorders to automate slide changes and synchronization.

Guidance on setting up for parallel display and dissolve effects using external units.

Information on KODAK accessories for creating dissolve effects and complex AV programs.

Guidelines for cleaning optics and projector care to ensure proper function.

Solutions for problems like lamp failure, motor issues, and poor image brightness.

Step-by-step instructions for safely replacing the projector lamp.

Lists compatible KODAK RETINAR lenses and the CAROUSEL S-AV 2000 slide tray.

Details infrared/wired remotes, twin socket adaptors, and interval timers.

Mentions carrying cases and programmable dissolve control units for advanced setups.

Describes the recorder for tape control and AV program creation.

Technical details for S-AV 1000 lenses: focal length, aperture, field angle.

Technical details for S-AV 2000 lenses: focal length, aperture, field angle.

Notes on the necessity of special condenser lenses for 40x40mm slides and specific focal lengths.