Need help?Do you have a question about the Kodak Carousel S-AV 1010 and is the answer not in the manual?
Check voltage compatibility and details of the captive mains lead.
Placement on a firm base, angle, and air circulation for cooling.
Projector accepts slides 5x5cm external, up to 3.2mm thick (DIN 108, T.1).
Tray capacity, loading instructions, and projector locking mechanism.
Usable lenses and required condenser settings for different formats.
Ensure curved side of condenser lens faces the lamp for optimal performance.
Key to understanding projected picture sizes based on distance and format.
Connecting to power and verifying voltage compatibility.
Aligning the lamp filament for maximum brightness and durability using adjustment screws.
Adjusting projector height using feet for stable projection.
How to focus using the lens, milled wheel, or remote control focus button.
Explanation of the automatic focusing feature for the S-AV 1030 model.
Using projector buttons, interval timer, or remote controls for slide changes.
Procedure for removing and replacing the slide tray, including emergency steps.
Setting up continuous projection and controlling changes via tape.
How to link multiple projectors for simultaneous operation.
Periodic servicing and cleaning advice for optimal performance.
Lists and explains potential issues like lamp failure, focus problems, and control malfunctions.
List of compatible lenses, timers, recorders, and carrying cases.
Safety precautions and step-by-step guide for replacing a defective lamp.
Details on slide feed, illumination, power, fuses, and safety standards.
Specifications for controls, connections, and the autofocus system.
Physical dimensions, weight, and permissible operating conditions.
To Next Page
General