Kodak Carousel 650 - User Manual

Procedure for adding thermal fuses to non-fused projectors.

Details on nonsymmetrical front condenser lens placement and models.

Procedure to correct misaligned left gate assembly causing jams.

Guide to selecting correct focus motor part numbers for replacement.

Procedure for aligning cell housing using a fan cap as a tool.

Details on power switch part numbers and wiring for different models.

Method to prevent shorts by taping the 6V lamp socket area.

Steps to test the auto-focus circuit board for component functionality.

Part numbers for Kodak manufactured motors and replacement guidelines.

Reverting focus motor wiring to resolve solenoid vibration/cycling.

Replacing capacitor for clutch issues and noise reduction.

Fuse part numbers and values for secondary circuits.

Collection of wiring diagrams for various Kodak Carousel projector models.

Troubleshooting cycling problems by rewiring the focus motor.