53
5
Setting an Exposure Compensation Default
You can adjust the Exposure Compensation setting so it is used every
time you turn on the camera. For more information about The Exposure
Compensation feature, see page 22.
1 Set the Mode dial to Camera Setup.
2 Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3 Press a button until the
icon is highlighted.
4 Press the DO-IT button.
The Exposure Compensation Default
screen appears.
5 Press a button until the exposure
compensation number you want
is highlighted.
If your pictures are too dark, increase (+)
the exposure number.
If your pictures are too light, decrease (-)
the exposure number.
The main default setting for Exposure
Compensation is 0.0.
6 Press the DO-IT button to accept the
changes and return to the main Camera
Setup screen.
/
/
To Next Page
Loading...
